Replacement Caster ( Heavy-Duty Locking)
RP1001-HD3L
Regular price $34.00The locking brakes are available on all 4 varieties of casters (standard 3" and heavy duty 3", 4" and 5"). It is recommended to add two locking casters of equal size and quality to both front legs of the AeroCreeper if the locking feature is required.
Standard Caster: 3” x 1” ball-bearing caster, with TPR (rubber) tread, rated at 120 lb dynamic load per caster.
Heavy-duty caster: 1-1/4" wide ball-bearing caster, with TPU (urethane) tread, rated at 250 lb dynamic load per caster. The wide wheel and larger swivel improves rolling on rough surfaces. The urethane tread is more chemical resistant and more resistant to picking up metal chips and rivets. (Please note: replacing the standard casters with the heavy-duty casters will increase the AeroCreeper height by ⅝” with the 3" casters, 1 ⅝” with the 4” casters and 2 ⅝” with the 5” casters.)
This caster has a 1/2" diameter stem. To replace casters with 3/8" stem (pre-Oct 2018 models), the holes will need to be enlarged.
Replacement Caster (Heavy-Duty)
RP1001-HD3
Regular price $28.00Heavy-duty caster: 1-1/4" wide ball-bearing caster, with TPU (urethane) tread, rated at 250 lb dynamic load per caster. The wide wheel and larger swivel improves rolling on rough surfaces. The urethane tread is more chemical resistant and more resistant to picking up metal chips and rivets. (Please note: replacing the standard casters with the heavy-duty casters will increase the AeroCreeper height by ⅝” with the 3" casters and 1 ⅝” with the 4” casters.)
This caster has a 1/2" diameter stem. To replace casters with 3/8" stem (pre-Oct 2018 models), the holes will need to be enlarged.
Replacement Caster (Standard)
RP1001-S3
Regular price $15.003” x 1” ball-bearing caster with TPR (rubber) tread rated at 120 lb. dynamic load per caster. Replacement for original casters on AeroCreeper.
This caster has a 1/2" diameter stem. To replace casters with 3/8" stem (pre-Oct 2018 models), the holes will need to be enlarged.
I purchased my manual AeroCreeper last week. I wish I had waited a week to obtain the discounted price. However, it is definitely built out of very solid steel to a high standard. I have not used my creeper as yet, however, I did exercise the adjustment procedures and are certain it will perform well. I am also confident you will not find a similar unit any better engineered.
Works great for this old man (72). Powered model. Don’t have to worry about how I’m getting up when I get down. The only thing is some thin rubber bumpers for when it goes completely flat. It’s a fairly hard shock to the body when it hits the bottom.
I have seen concepts of a product like this several years ago, but those never became real. I admit I was somewhat concerned that this product would follow the previous realities and perceptions, but was delighted upon arrival.
The creeper is extremely well packaged. There were some minor holes in the cardboard box, but the unit inside was well protected.
The unit needs some minor assembly which was very straight forward. The motorized system is smooth and works very well.
I recently had significant back surgery and this creeper is exactly what I needed to work on my heavy equipment.
Was skeptical at first, but using this to service GA landing gear, and so much more makes it worth so much. Had the original, went w the motorized version. Yes not cheap, but what isn't thats good.Theres no other creeper like it anywhere.Your back and shoulders will thank you. Have used diff creepers and more from Snp on and more.Nothing compares, and the quality is phenomenal.
Not that good for cars and other low to ground stuff, but if you have to be a couple feet in the air, this is the cats meow...
Inexpensive highly useful and well built tray!
Was skeptical at first, but using this to service GA landing gear, and so much more makes it worth so much. Had the original, went w the motorized version. Yes not cheap, but what isn't thats good.Theres no other creeper like it anywhere.Your back and shoulders will thank you. Have used diff creepers and more from Snp on and more.Nothing compares, and the quality is phenomenal.
Not that good for cars and other low to ground stuff, but if you have to be a couple feet in the air, this is the cats meow...
Very sturdy with high quality parts THIS IS NOT CHINA JUNK !!! Yes it is a little pricey put it's worth it a one time great investment. Works great for all kinds of applications super versatile.
I run an Aviation Detailing company "Blue Ridge Detail, LLC"in Virginia and use this on every aircraft. It make cleaning the belly, bottom of wings and horizontals a breeze. I made the mistake of not using it 1 time and my back was hurting for 2 months. Will not do that again haha. 5 stars 100x over.
I unpacked the new unit. All parts were included. However, one of the Milwaukee batteries is bad and will. It charge. How do I get a replacement battery? Overall, the unit works perfectly!